Search results
a. Fill the suction Pipe and Pump Body through the Priming Inlet. b. Close the Inlet after verifying that there are no leaks. c. Open the spigots, faucets and/or taps on the Delivery Pipe so that air can be release from the suction cycle. 4. This is a self-starting pump that uses a pressure switch. Once the power cord is
Air Miles Calculator helps you calculate how many miles it is from one airport to another and provides a map, estimated flight time, time difference between cities, and estimated CO2 emissions.
The length, type, and size of the suction and discharge hoses can significantly affect Pump output. Discharge head capability is always greater than suction head capability. This means pumping height for the Intake Hose (suction head) should be shorter than the pumping height for the Discharge Hose.
The pump must be connected to a GFCI protected plug which has been installed according to regulations. The plug must have a supply voltage of 120 VAC at 60 Hz.
Owner’s Manual & Safety Instructions. Save This Manual Keep this manual for the safety warnings and precautions, assembly, operating, inspection, maintenance and cleaning procedures. Write the product’s serial number in the back of the manual near the assembly diagram (or month and year of purchase if product has no number).
air leaks. All joints and connections of the intake hose should be securely tightened to prevent air from entering the intake side. Make sure the intake hose is free from kinks. In addition, the height from the intake to the pump and then the height from the outlet to the discharge will greatly impact pump performance. Operation
Harbor Freight Tools
