Yahoo Poland Wyszukiwanie w Internecie

Search results

  1. 1 dzień temu · Check the tension: Make sure the top thread tension is not too tight or too loose. Adjust the tension settings if necessary. Clean the machine: Lint and debris can cause thread bunching. Clean the bobbin area and feed dogs. 2. Skipped Stitches. Problem: The sewing machine skips stitches, leaving gaps in the seam.

  2. 4 dni temu · First, unplug your machine, raise the needle up to the highest position, and then unscrew the needle clamp screw. Take out the old needle and insert a new one with its flat side toward the back, pushing it up as far as it will go. Tighten the screw securely. Use the correct needle for the recommendation of your fabric.

  3. 1 dzień temu · The groove’s size and length change with the needle’s size and type. Eye – The eye of a sewing machine needle is near the point, which is opposite to where the eye of a hand sewing needle is. The eye is the hole that the thread goes through when you thread your sewing machine and it will vary in size depending on the type of needle.

  4. 4 dni temu · These seven solutions assure you of not being haunted anymore by sewing machine stitch problems. Applying these fixes, troubleshooting tips, and dealing with threading issues, needle problems, thread choice, and tension settings can change the way you sew. Take control of your machine and master it.

  5. 3 dni temu · Ashley Hough shares a fun hand-stitching tip that makes accurately spacing your hand-sewing stitches quicker and easier. The Right Tools. For this hand-stitching tip, all you need is a ruler and a marking pen. Because of where you will be doing the marking, a regular ballpoint pen is recommended rather than a fabric pen or pencil.

  6. 4 dni temu · Stop about a half-inch from the corner and make a 90-degree turn. This is a fundamental skill in sewing. In some ways, curves are easier than corners. To make a crisp, strong corner, stop and make sure the needle is down in the fabric. My machine does this automatically, but you can also do this by turning the handwheel.

  7. ZJ Humbach shows you two different ways to hand-sew a hem on a project including the slip stitch, also referred to as the whip stitch and the blind hem stitch. Tools. For both of these hand-sewing hemming methods, ZJ explains how to get ready to sew the hem by threading a hand-sewing needle.