Search results
Wiring Diagram 1. Connect the BLACK ground wire to a good vehicle ground, negative battery terminal recommended. It is important to connect the ground wire before plugging in the 16-pin connector and connecting the battery cable! 1. Connect the black ground wire. 2. Connect the 16-pin power module connector, a click should be heard once the ...
There are 3 control wires for external control of accessories and switch panel backlighting illumination. • IGNITION Input, Lt. Blue wire. Enables ignition programmed switches and turns on backlighting to 70%.
A series talking all things the Switch-Pros switch panels can do, and how to make them happen with step-by-step instructions! If the above information did not answer your question, please contact us at techsupport@switch-pros.com or by phone at 949.581.2991
SP9100 8-Switch Programmable Switch Panel Power System. 1. You MUST connect the Lt. Blue Ignition sense wire to an ignition or accessory source for the switches to operate. The default setting for all switches is "Ignition" controlled. 2. Connect the black ground wire directly to the Negative terminal of the battery. DO NOT connect to frame ground.
Clear, easy-to-read wiring diagrams for connecting multiple receptacle outlets in a row, including GFCI and Duplex Receptacles.
This page contains several diagrams for wiring a switch to control one or more receptacle outlets including a split receptacle and multiple outlets wired together. Wiring a Switch to an Outlet. This wiring illustrates a switched outlet circuit with the source and switch coming first.
For Jeep JK, route the Switch Panel harness (4 wires, in expandable nylon sleeve, with 4 pin connector) through the fire- wall pass-through on DRIVER’S SIDE and into the cab to the location where the Switch Panel will be mounted.
